20260416
04421800
1.0
sw_ctrl_other_line_line
1226712.024839
1481785.722367
63360.579113
284994.193588
1
002
-
Ctrl_Other_Line__ATTACHREL
Relationship
-
Ctrl_Other_Line__ATTACHREL
Relationship
Projected
GCS_North_American_1983_HARN
Linear Unit: Foot_US (0.304801)
NAD_1983_HARN_StatePlane_Washington_North_FIPS_4601_Feet
<ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/3.5.0'><WKT>PROJCS["NAD_1983_HARN_StatePlane_Washington_North_FIPS_4601_Feet",GEOGCS["GCS_North_American_1983_HARN",DATUM["D_North_American_1983_HARN",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Lambert_Conformal_Conic"],PARAMETER["False_Easting",1640416.666666667],PARAMETER["False_Northing",0.0],PARAMETER["Central_Meridian",-120.8333333333333],PARAMETER["Standard_Parallel_1",47.5],PARAMETER["Standard_Parallel_2",48.73333333333333],PARAMETER["Latitude_Of_Origin",47.0],UNIT["Foot_US",0.3048006096012192],AUTHORITY["EPSG",2926]],VERTCS["WGS_1984",DATUM["D_WGS_1984",SPHEROID["WGS_1984",6378137.0,298.257223563]],PARAMETER["Vertical_Shift",0.0],PARAMETER["Direction",1.0],UNIT["Meter",1.0],AUTHORITY["Esri",115700]]</WKT><XOrigin>-117104300</XOrigin><YOrigin>-99539600</YOrigin><XYScale>3048.0060960121928</XYScale><ZOrigin>0</ZOrigin><ZScale>1</ZScale><MOrigin>0</MOrigin><MScale>1</MScale><XYTolerance>0.0032808333333333331</XYTolerance><ZTolerance>0.001</ZTolerance><MTolerance>0.001</MTolerance><HighPrecision>true</HighPrecision><WKID>2926</WKID><LatestWKID>2926</LatestWKID><VCSWKID>115700</VCSWKID><LatestVCSWKID>115700</LatestVCSWKID></ProjectedCoordinateSystem>
20260416
04421800
FGDC
20170526
10532500
FALSE
500000
5000
FGDC CSDGM Metadata
ArcGIS Metadata
1.0
withheld
Enterprise Geodatabase Feature Class
giscenter@kingcounty.gov
KCGIS Center
Data Coordinator
206-477-4803
201 S Jackson St
Seattle
WA
98104
US
giscenter@kingcounty.gov
Jeanie Pride
withheld
/plibrary2/utility/shapes/arc/sw_Ctrl_Other_Line.shp
2014-11-03
One
King County
King County, WA
King County
vector digital data
None
Control Other Line
http://www5.kingcounty.gov/sdc/DataImages/Ctrl_Other_Line.jpg
JPG File of layer overlain on base of WA counties or local cities
JPG
Not applicable
Pacific NW
King County
WA
Washington state
Not applicable
utility
MS4
stormwater
drainage
Municipal Separate Stormwater Sewer System
NPDES Municipal Stormwater permit
utilityMS4stormwaterdrainageMunicipal Separate Stormwater Sewer SystemNPDES Municipal Stormwater permitutilitiesCommunicationPacific NWKing CountyWAWashington stateSW_CTRL_OTHER_LINE_LINE (2512)_LINE
King County disclaims any warranty of use of any digital product or data beyond that for which it was designed.
<a target='_blank' href='https://kingcounty.gov/en/dept/kcit/data-information-services/gis-center/about/terms-conditions-copyrights' rel='nofollow ugc noopener noreferrer'>https://kingcounty.gov/en/dept/kcit/data-information-services/gis-center/about/terms-conditions-copyrights</a>
A stormwater management feature or best management practice (BMP) that provides Flow Control and/or Water Quality, but does not fit in one of the other Control Components.
For more information about this layer please see the <a href='https://www5.kingcounty.gov/sdc?Layer=SW_CTRL_OTHER_LINE_LINE' rel='nofollow ugc'>GIS Data Catalog</a>.<br /><br />Control Other Line Component Type---Infiltration Trench: 2-5’ wide trench designed to infiltrate stormwater below the ground surface. They feature perforated distribution pipes that is topped with filter fabric to prevent dispersal to the ground surface.---Bioretention Swale: May have rocks in the swale, various plantings with a landscaped feature look. ---Dispersal Trench: 2.5’ or greater trench designed to disperse stormwater to the ground surface. They feature perforated distribution pipes and a filter fabric trench liner to prevent infiltration. ---Basic Dispersion: Basic dispersion is the application of dispersion devices that utilize any available capacity of onsite vegetated areas to mitigate the runoff quantity and quality impacts from developed surfaces (i.e., impervious and non-native pervious surfaces). The requirements for basic dispersion are less restrictive than full dispersion in that any type of vegetation cover is allowed, the flowpath lengths through the vegetation are shorter, and there is no requirement to preserve native vegetated surface (e.g., forested surface) or minimize developed surface. As such, its mitigation of runoff impacts is significantly lower than that of full dispersion.---Full Dispersion: Features a native vegetated flowpath segment of at least 100ft (25ft for sheet flow from a non-native pervious surface) along the flowpath that runoff would follow upon discharge. The flowpath segment must be either onsite or in an offsite tract or easement area reserved for dispersion and should be designated as a “native growth retention area” on the flow control BMP site plan attached to the required declaration of covenant and grant of easement. Full dispersion involves use of splash blocks, rock pads, gravel filled trenches or sheet flow.
King County WLRD Stormwater Services Section, King County GIS Center
Esri ArcGIS 13.5.0.57366
1
-122.51577401076761
-121.47106611188363
47.77947774577633
47.161442741951575
2015-10-16T00:00:00
Data is imported and editing begins
Jeanie Pride
King County
Business Analyst
201 S Jackson St, KSC-NR-0600
Seattle
WA
98104-3855
jeanie.pride@kingcounty.gov
(206) 477-4803
8:00 AM - 5:00 PM Mon-Fri, but with every other Friday off.
Jeanie Pride
Control Other Line
line data table
King County
Feature Class
1074
OBJECTID
OBJECTID
OID
4
10
0
Internal feature number.
Esri
Sequential unique whole numbers that are automatically generated.
Shape
King County
Shape
Geometry
8
0
0
Feature geometry.
Coordinates defining the features.
DBAssetID
DB Asset ID
String
35
0
0
SOP Chapter 2: Database Design
DBAssetID is the unique identifier that is used to tie to Cityworks, MIS, or some other database. The DBAssetID is unique for each feature class and is generated by a script that runs nightly. Users should not modify the DBAssetID.
ComponentType
SOP Chapter 2: Database Design
King County
Bioretention Swale
Bioretention Swale: Bioretention Swale: May have rocks in the swale, various plantings with a landscaped feature look.
Infiltration Trench
King County
Infiltration Trench: 2-5’ wide trench designed to infiltrate stormwater below the ground surface. They feature perforated distribution pipes that is topped with filter fabric to prevent dispersal to the ground surface.
Basic Dispersion
Basic Dispersion: Basic dispersion is the application of dispersion devices that utilize any available capacity of onsite vegetated areas to mitigate the runoff quantity and quality impacts from developed surfaces (i.e., impervious and non-native pervious surfaces). The requirements for basic dispersion are less restrictive than full dispersion in that any type of vegetation cover is allowed, the flowpath lengths through the vegetation are shorter, and there is no requirement to preserve native vegetated surface (e.g., forested surface) or minimize developed surface. As such, its mitigation of runoff impacts is significantly lower than that of full dispersion.
King County
Full Dispersion
Full Dispersion: Full Dispersion: Features a native vegetated flowpath segment of at least 100ft (25ft for sheet flow from a non-native pervious surface) along the flowpath that runoff would follow upon discharge. The flowpath segment must be either onsite or in an offsite tract or easement area reserved for dispersion and should be designated as a “native growth retention area” on the flow control BMP site plan attached to the required declaration of covenant and grant of easement. Full dispersion involves use of splash blocks, rock pads, gravel filled trenches or sheet flow.
King County
Component Type
String
40
0
0
Within the Puget Sound Stormwater Infrastructure Framework, Component Type is the finest classification for a structure.
Intent
Intent
String
55
0
0
SOP Chapter 2: Database Design
Intent tracks whether the infrastructure was designed primarily to convey stormwater or a natural water body.
Underdrain
SOP Chapter 2: Database Design
No
King County
Yes
King County
Underdrain
String
25
0
0
Underdrain tracks if the Control feature has an underdrain.
FCBMPType
Flow Control BMP Type
String
75
0
0
PipeMaterial
Pipe Material
String
50
0
0
SOP Chapter 2: Database Design
Pipe Material tracks the material the underdrain pipe is made of.
PipeDiameter
Pipe Diameter (in)
SmallInteger
2
5
0
SOP Chapter 2: Database Design
Pipe Diameter is the average inner diameter of the Connect structure, not the opening (cover frame or slab).
Liner
Liner
String
50
0
0
Material type of low permeability liner or treatment liner that is located underneath the stormwater control feature.
King County
OwnerEntity
SOP Chapter 2: Database Design
King County
Private
King County
WLRD
King County
Owner Entity
String
25
0
0
OwnerEntity tracks the owner of the particular feature.
Jurisdiction
SOP Chapter 2: Database Design
King County
King County
Jurisdiction
String
30
0
0
Jurisdiction tracks the jurisdiction that governs the land that the asset resides in.
XYSource
SOP Chapter 2: Database Design
Picked from aerial
King County
XY Source
String
25
0
0
XYSource tracks the method in which the geographic location of the asset was recorded.
KingCountyMS4
King County MS4
String
25
0
0
FieldVisitDate
SOP Chapter 2: Database Design
Field Visit Date
Date
8
0
0
FieldVisiteDate tracks the date that staff last visited the feature in the field.
LastEditDate
SOP Chapter 2: Database Design
Last Edit Date
Date
8
0
0
LastEditDate tracks the date that staff last edited the feature.
DataStage
SOP Chapter 2: Database Design
Acquire
King County
Process
King County
Data Stage
String
25
0
0
DataStage tracks the status of the data as it moves through the QAQC process.
CurrentStatus
SOP Chapter 2: Database Design
Active
King County
Current Status
String
25
0
0
CurrentStatus tracks the status of the data as it moves through the lifecycle of an asset.
DataSource
SOP Chapter 2: Database Design
King County
SWSS Mapping
King County
Data Source
String
25
0
0
DataSource tracks the group, program, or process that added the data.
FacilityID
Facility ID
String
50
0
0
SOP Chapter 2: Database Design
FacilityID tracks the FacilityID number that the feature is a part of.
PlanLink
Plan Link
String
150
0
0
SOP Chapter 2: Database Design
When digital plans are available, PlanLink provides a hyperlink to plan files.
GlobalID
GlobalID
GlobalID
38
0
0
ESRI
GlobalID is a 36 character string that ArcGIS uses to uniquely identify features or table rows within a geodatabase and across geodatabases.
AssetID
SOP Chapter 2: Database Design
King County
5740
King County
5741
King County
5742
King County
5923
King County
5924
King County
5954
King County
5992
King County
6358
King County
6476
King County
6480
King County
6778
King County
7134
King County
7641
King County
7642
King County
AssetID
Integer
4
10
0
AssetID is the unique identifier that is used to tie to Cityworks, MIS, or some other database. The AssetID is unique for each feature class and is generated by a script that runs nightly. Users should not modify the AssetID.
PAA
PAA
String
60
0
0
SOP Chapter 2: Database Design
PAA tracks which Potential Annexation Area an asset intersects, if applicable.
CCTVInspectionDate
Most Recent CCTV Inspection
Date
8
0
0
Most Recent CCTV Inspection tracks the date of the most recent CCTV inspection.
King County
Shape.STLength()
Shape.STLength()
Double
0
0
0
Shape is used by ArcGIS to store the geometry of a feature.
ESRI
King County
A stormwater management feature or best management practice (BMP) that provides Flow Control and/or Water Quality, but does not fit in one of the other Control Components.
dataset
EPSG
6.3(9.0.0)
1074
Simple
FALSE
1074
TRUE
FALSE
20260416
Jeanie Pride
King County
Business Analyst
201 S Jackson St, KSC-NR-0600
Seattle
WA
98104-3855
jeanie.pride@kingcounty.gov
(206) 477-4803
8:00 AM - 5:00 PM Mon-Fri, but with every other Friday off.
Jeanie Pride
Assets undergo a peer review/QAQC process.
Data is validated through a nightly script but does not prevent data with errors from being published. These errors should be corrected during the peer review process.
Mapping practices must adhere to established guidelines in our Standard Operating Procedures (SOPs).
Assets undergo a peer review/QAQC process and are validated with a nightly script.
Facilities undergo a peer review process wherein the completeness and omission of assets are assessed.
Peer review.
Data is sourced from multiple data sources from within King County.
Data imported from KC Roads and other sources.
2015-10-16T00:00:00