<?xml version="1.0" encoding="UTF-8" standalone="no"?><metadata xml:lang="en">
    <dataIdInfo>
        <envirDesc>Esri ArcGIS 10.1.0.3035</envirDesc>
        <dataLang>
            <languageCode value="eng"/>
            <countryCode value="USA"/>
        </dataLang>
        <idCitation>
            <resTitle>Lead_1978std_naa</resTitle>
            <presForm>
                <PresFormCd value="005"/>
            </presForm>
        </idCitation>
        <spatRpType>
            <SpatRepTypCd value="001"/>
        </spatRpType>
        <dataExt>
            <geoEle>
                <GeoBndBox esriExtentType="search">
                    <exTypeCode>1</exTypeCode>
                    <westBL>-111.95144</westBL>
                    <eastBL>-84.924106</eastBL>
                    <northBL>46.607792</northBL>
                    <southBL>32.41404</southBL>
                </GeoBndBox>
            </geoEle>
        </dataExt>
    <idAbs>This data layer identifies areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment". The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA sets limits on how much of a pollutant can be in the air anywhere in the United States. This ensures that all Americans have the same basic health and environmental protections. The law allows individual states to have stronger pollution controls, but states are not allowed to have weaker pollution controls than those set for the whole country. EPA calls these pollutants "criteria air pollutants" because the agency has regulated them by first developing health-based criteria (science-based guidelines) as the basis for setting permissible levels. One set of limits (primary standard) protects health; another set of limits (secondary standard) is intended to prevent environmental and property damage. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas.</idAbs><idPurp>This data set is intended to help provide the public with information to determine whether or not air quality within a given area is healthy.  Once designations take effect, they also become an important component of state, tribal and local governments' efforts to control criteria air pollutants.
The Clean Air Act requires EPA to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards.
EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of six common air pollutants known as criteria pollutants. After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions.
For further info please refer to http://www.epa.gov/oar/oaqps/greenbk/index.html
Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices (http://www.epa.gov/oar/oaqps/greenbk/regcntct.html) EPA Headquarters should be contacted only when the Regional Office is unable to answer a question.</idPurp></dataIdInfo>
    <mdLang>
        <languageCode value="eng"/>
        <countryCode value="USA"/>
    </mdLang>
    <mdChar>
        <CharSetCd value="004"/>
    </mdChar>
    <distInfo>
        <distFormat>
            <formatName>Shapefile</formatName>
        </distFormat>
        <distTranOps>
            <transSize>0.036</transSize>
        </distTranOps>
    </distInfo>
    <mdHrLv>
        <ScopeCd value="005"/>
    </mdHrLv>
    <mdHrLvName>dataset</mdHrLvName>
    <refSysInfo>
        <RefSystem>
            <refSysID>
                <identCode code="4269"/>
                <idCodeSpace>EPSG</idCodeSpace>
                <idVersion>7.9.4</idVersion>
            </refSysID>
        </RefSystem>
    </refSysInfo>
    <spatRepInfo>
        <VectSpatRep>
            <geometObjs>
                <geoObjTyp>
                    <GeoObjTypCd value="002"/>
                </geoObjTyp>
                <geoObjCnt>13</geoObjCnt>
            </geometObjs>
            <topLvl>
                <TopoLevCd value="001"/>
            </topLvl>
        </VectSpatRep>
    </spatRepInfo>
    <eainfo>
        <detailed>
            <enttyp>
                <enttypl>Lead_1978std_naa</enttypl>
            </enttyp>
            <attr>
                <attrlabl>FID</attrlabl>
                <attrdef>Internal feature number.</attrdef>
                <attrdefs>Esri</attrdefs>
                <attrdomv>
                    <udom>Sequential unique whole numbers that are automatically generated.</udom>
                </attrdomv>
            </attr>
            <attr>
                <attrlabl>Shape</attrlabl>
                <attrdef>Feature geometry.</attrdef>
                <attrdefs>Esri</attrdefs>
                <attrdomv>
                    <udom>Coordinates defining the features.</udom>
                </attrdomv>
            </attr>
            <attr>
                <attrlabl>AREA_NAME</attrlabl>
            </attr>
            <attr>
                <attrlabl>COMPOSID</attrlabl>
                <attrdef>The attribute table contains a "COMPOSID" or "Common_Area_Mapping_ID" field displaying a unique identifier developed by EPA for designated nonattainment areas for all National Ambient Air Quality Standards (NAAQS). This identifier was developed specifically for use across GIS applications, but it is also available for use as an area ID for other purposes. The "COMPOSID" is clearly recognizable, defining the pollutant, the pollutant standard, and a general name for the area, e.g., Ozone_8-hr.1997.Chicago.</attrdef>
            </attr>
        </detailed>
    </eainfo>
    <mdDateSt>20131204</mdDateSt>
    <idinfo>
        <descript>
            <abstract>This data layer identifies areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment". The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA sets limits on how much of a pollutant can be in the air anywhere in the United States. This ensures that all Americans have the same basic health and environmental protections. The law allows individual states to have stronger pollution controls, but states are not allowed to have weaker pollution controls than those set for the whole country. EPA calls these pollutants "criteria air pollutants" because the agency has regulated them by first developing health-based criteria (science-based guidelines) as the basis for setting permissible levels. One set of limits (primary standard) protects health; another set of limits (secondary standard) is intended to prevent environmental and property damage. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas.</abstract>
            <purpose>This data set is intended to help provide the public with information to determine whether or not air quality within a given area is healthy.  Once designations take effect, they also become an important component of state, tribal and local governments' efforts to control criteria air pollutants.
The Clean Air Act requires EPA to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards.
EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of six common air pollutants known as criteria pollutants. After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions.
For further info please refer to http://www.epa.gov/oar/oaqps/greenbk/index.html
Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices (http://www.epa.gov/oar/oaqps/greenbk/regcntct.html) EPA Headquarters should be contacted only when the Regional Office is unable to answer a question.</purpose>
            <supplinf>http://www.epa.gov/oar/oaqps/ - Office of Air Quality Planning and Standards web site http://www.epa.gov/air/criteria.html - National Ambient Air Quality Standards web page</supplinf>
        </descript>
        <keywords>
            <theme>
                <themekt>ISO 19115 Topic Category</themekt>
            </theme>
            <theme>
                <themekt>EPA GIS Keyword Thesaurus</themekt>
            </theme>
            <place>
                <placekt>None</placekt>
            </place>
            <theme>
                <themekt>User</themekt>
            </theme>
        </keywords>
        <citation>
            <citeinfo>
                <origin>U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards (OAQPS)</origin>
                <title>1978 Lead Nonattainment Areas – 1992 designation</title>
                <pubinfo>
                    <publish>U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards (OAQPS)</publish>
                    <pubplace>Research Triangle Park, NC</pubplace>
                </pubinfo>
                <onlink>http://www.epa.gov/oar/oaqps/greenbk/index.html</onlink>
                <onlink>http://www.epa.gov/oar/oaqps/greenbk/gis_download.html</onlink>
            </citeinfo>
        </citation>
        <ptcontac>
            <cntinfo>
                <cntorgp>
                    <cntorg>U.S. Environmental Protection Agency, Office of Air and Radiation-Office of Air Quality Planning and Standards</cntorg>
                    <cntper>Halil Cakir</cntper>
                </cntorgp>
                <cntpos>EDG Steward</cntpos>
                <cntaddr>
                    <addrtype>mailing and physical address</addrtype>
                    <address>109 T.W. Alexander Drive</address>
                    <city>Research Triangle Park</city>
                    <state>NC</state>
                    <postal>27709</postal>
                </cntaddr>
                <cntvoice>919-541-5390</cntvoice>
                <cntemail>cakir.halil@epa.gov</cntemail>
                <cntinst>http://www.epa.gov/aboutepa/oei.html</cntinst>
            </cntinfo>
        </ptcontac>
    </idinfo>
    <distinfo>
        <distliab>Although these data have been processed successfully on a computer system at the Environmental Protection Agency, no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. It is strongly recommended that careful attention be paid to the contents of the metadata file associated with these data to evaluate data set limitations, restrictions or intended use. The U.S. Environmental Protection Agency shall not be held liable for improper or incorrect use of the data described and/or contained herein.

Known Issues:
The area boundary for Jefferson County (part), AL is too large.  It includes the whole county, instead of only part of the county.</distliab>
    </distinfo>
<Binary><Thumbnail><Data EsriPropertyType="PictureX">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</Data></Thumbnail></Binary></metadata>