Description: Caltrans provides Safety Roadside Rest Areas as a part of the State Highway System pursuant to Streets and Highways Code, Sections 218-226.5. Safety Roadside Rest Areas provide opportunities for travelers to safely stop, stretch, take a nap, use the restroom, get water, check maps, place telephone calls, switch drivers, check vehicles and loads, and exercise pets. Rest areas reduce drowsy and distracted driving and provide a safe and convenient alternative to unsafe parking along the roadside. This dataset provides the detail rest area information collected from Right of Way and the Statewide Rest Areas List from Division of Maintenance. The data was last updated on 08-15-2023, Verification Source: CT Public Facilities Inventory List.In some cases, rest areas are closed temporarily for maintenance, the facility web links will help to check the current status of the rest areas.
Copyright Text: Caltrans, Division of Maintenance, Right of Way
Description: Provide compiled GTFS schedule data in geospatial format. Transit routes associates route information to shapes. Transit stops associates aggregated stop times and route information aggregated for each stops.
Description: Provide compiled GTFS schedule data in geospatial format. Transit routes associates route information to shapes. Transit stops associates aggregated stop times and route information aggregated for each stops.
Description: Parking: A simplified point layer of the centroids of California State Parks parking area polygons, providing location, name, type and other attributes. Current as of February 25, 2021.
Copyright Text: California State Parks: Enterprise Geographic Information Systems
Description: Selected, main entrance points for 282 pubicly accessible Units and Properties of the California State Park System, prepared by the California Department of Parks and Recreation (DPR, aka California State Parks, CSP) enterprise GIS team for the purpose of data sharing with cooperating agencies. Attributes include Park name, location, web page link, and direct links to Park Brochure Maps and Campground Maps. DPR recommends internal use only, due to included DPR Administrative Unit coding: Districts, Sectors, Units, plus the foreign key, RECNO, to the DPR GeoFile now superseded by a computer-assisted dispatch CAD system under Agreement with the California Highway Patrol), Contacts: kelly.thorn@parks.ca.gov (Web); victoria.yturralde@parks.ca.gov (Publications, Brochure Maps); Michael Lynch (Communication Centers); gary.walter@parks.ca.gov (enterprise GIS architecture); isaac.oshima@parks.ca.gov (Applications); alan.kilgore@parks.ca.gov (Analysis); paul.veisze@parks.ca.gov (metadata author, GIS Manager; 916-949-3327; DPR Facilities Management Division, 704 O Street, Sacramento, CA 95814; draft 2013.12.11; 2014.06.05; 2015.11.09).
Copyright Text: California State Parks Publications Section, Communication Centers, Web team, Enterprise GIS team.
Description: Park Boundaries: A simplified polygon layer of California State Parks Boundaries, providing Unit name, subtype and other attributes. California State Park Boundaries are for reference and not for official or legal property boundary determination. Current as of February 25, 2021.
Copyright Text: California State Parks: Enterprise Geographic Information Systems
Description: This dataset is one of several available datasets related to California counties that were created as a group designed to work in topological sync with each other. Further details about these paired datasets can be found in their respective metadata. Further details about the full process and update notes can be found in the GDB container metadata.This specific dataset represents the basic (ie simplified) county dataset without the extra coding that can be found in the "full" dataset. In this dataset, all bays (plus bay islands and constructed features) are merged into the mainland, and coastal features (such as islands and constructed features) are not included, with the exception of the Channel Islands which ARE included. This dataset is the same as the cnty_basic, except for the addition of the Channel Islands.
Copyright Text: U.S. Bureau of Reclamation, California Department of Conservation, California Department of Fish and Game, California Department of Forestry and Fire Protection, National Oceanic and Atmospheric Administration
Description: This dataset is one of several available datasets related to California counties that were created as a group designed to work in topological sync with each other. Further details about these paired datasets can be found in their respective metadata. Further details about the full process and update notes can be found in the GDB container metadata.This specific dataset represents the basic (ie simplified) county dataset without the extra coding that can be found in the "full" dataset. In this dataset, all bays (plus bay islands and constructed features) are merged into the mainland, and coastal features (such as islands and constructed features) are not included, with the exception of the Channel Islands which ARE included. This dataset is the same as the cnty_basic, except for the addition of the Channel Islands.
Copyright Text: U.S. Bureau of Reclamation, California Department of Conservation, California Department of Fish and Game, California Department of Forestry and Fire Protection, National Oceanic and Atmospheric Administration
Description: StateHighways are state highways based upon the Caltrans Linear Referencing System. Each record in this layer represents a highway segment where the county, route, postmile prefix, and postmile suffix are the same. Each segment has a begin and end postmile. This geometry is based upon the extraction from TSN on 10 October 2022.
Copyright Text: California Department of Transportation (Caltrans)
Description: This Functional Classification dataset was exported from Caltrans Linear Reference System (LRS) on July 3rd, 2024. The LRS serves as the framework upon which the Highway Performance Monitoring System (HPMS) and other business data are managed.
Copyright Text: California Department of Transportation (Caltrans)
Description: StateHighways are state highways based upon the Caltrans Linear Referencing System. Each record in this layer represents a highway segment where the county, route, postmile prefix, and postmile suffix are the same. Each segment has a begin and end postmile. This geometry is based upon the extraction from TSN on 10 October 2022.
Copyright Text: California Department of Transportation (Caltrans)
Description: This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was first published on October 20, 2021, and was based on the State Board of Equalization's tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax jurisdictions. The boundaries are continuously being revised when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax areas and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the California State Board of Equalization's 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned "000" to indicate that the area is not within a city).
Copyright Text: California Department of Tax and Fee Administration, GIS and Data Services Section, Anna.Price@cdtfa.ca.gov, (916) 309-1479.
Description: This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was first published on October 20, 2021, and was based on the State Board of Equalization's tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax jurisdictions. The boundaries are continuously being revised when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax areas and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the California State Board of Equalization's 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned "000" to indicate that the area is not within a city).
Copyright Text: California Department of Tax and Fee Administration, GIS and Data Services Section, Anna.Price@cdtfa.ca.gov, (916) 309-1479.
Description: This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was first published on October 20, 2021, and was based on the State Board of Equalization's tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax jurisdictions. The boundaries are continuously being revised when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax areas and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the California State Board of Equalization's 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned "000" to indicate that the area is not within a city).
Copyright Text: California Department of Tax and Fee Administration, GIS and Data Services Section, Anna.Price@cdtfa.ca.gov, (916) 309-1479.
Description: The Office of Environmental Health Hazard Assessment (OEHHA), on behalf of the California Environmental Protection Agency (CalEPA), announces the availability of the Communities Environmental Health Screening Tool: CalEnviroScreen Version 4.0. CalEnviroScreen is a screening methodology that can be used to help identify California communities that are disproportionately burdened by multiple sources of pollution. The 4.0 report and supporting documents are available at: http://oehha.ca.gov/calenviroscreen/report/calenviroscreen-40
Description: This dataset is one of several available datasets related to California counties that were created as a group designed to work in topological sync with each other. Further details about these paired datasets can be found in their respective metadata. Further details about the full process and update notes can be found in the GDB container metadata.This specific dataset represents the basic (ie simplified) county dataset without the extra coding that can be found in the "full" dataset. In this dataset, all bays (plus bay islands and constructed features) are merged into the mainland, and coastal features (such as islands and constructed features) are not included, with the exception of the Channel Islands which ARE included. This dataset is the same as the cnty_basic, except for the addition of the Channel Islands.
Copyright Text: U.S. Bureau of Reclamation, California Department of Conservation, California Department of Fish and Game, California Department of Forestry and Fire Protection, National Oceanic and Atmospheric Administration